If you are installing a new bathroom or remodeling an old one, you must know your bathroom fixtures’ dimensions to purchase the right shower door size.

A glass shower door will improve the bathroom’s aesthetic, but it should be functional as well. Selecting the correct glass shower door size will help you enjoy your new shower without water leaking everywhere or doors not closing correctly.

At Glassupply.com, we supply various glass shower doors and work with you to customize them to your needs. Let us look at how to determine the correct size of shower door you need.

What is the most common size of glass shower doors?

Most glass shower doors measure between 22 inches and 36 inches in width and an average height of 72 inches.

Shower doors, however, have varying sizes because the minimum size of your opening determines them.

Step by step guide on how to accurately measure glass shower door and panel size

  1. The first step is to sketch a diagram that represents the measurements of your shower.
  2. Using a tape measure, take the width of the shower opening from both sides of the wall along the base, top, and middle.
  • If the shower space is neo angled, take the width of each section along its base.
  1. Make sure the wall is leveled and straight so that installations are easy. Older homes may not have straight walls. You should place a level flat on each of the walls, and the wall is straight if the bubble appears centered between the indication lines. If the wall is not straight, measure the difference by holding the level away from the wall until the bubble is centered and mark it on the drawing.
  2. Measure the shower door’s height from where it will rest to where you want it to end.
  3. If you are replacing an old shower door, its width will be sufficient. The original measurement of the width will be over the whole threshold you just measured. If the width of the shower door you have is smaller than that of the entry, you should measure the required width.
  • If you install a hinged or pivoted door, you should ensure that you have enough room for it. Place your tape measure where the door hinges will be and measure out the desired width. Then measure in a semicircular motion the direction the door will swing to confirm enough room.

Pro tip: repeat the measurements to ensure precision. Make sure your doorways and passage are big enough to accommodate the size of the door.

Factors that affect the size of a shower door

Shower spaces are unique, and a few factors can determine the right sized glass door.

  • The amount of space available
  • The size of the door you choose should leave enough room for adequate air circulation
  • The ability of your bathroom walls to bear the weight of the door
  • The door should also let in enough light
  • The type of shower door that you choose to install

You can choose a frameless or framed shower door depending on the style your style. Here are a variety of glass shower door layouts that you can buy at Glassupply.com.

When used in combination with a shower door or small openings, fixed shower glass panels function as entry points into the shower. They are available in various sizes with widths between 3 – 96 inches and heights between 10 – 150 inches. The fixed screens are available for different styles, including corner units with clamps on either the right or the left.

Sliding shower doors are ideal for small bathroom spaces that lack enough floor space for opening doors or wider shower openings. They consist of two or three glass panels that slide along each other. We can customize the glass shower door to fit the dimensions of the bathroom opening.

  • Splash guards

Splash guards prevent water from splashing out of the bathtub or shower and pooling on the floor. They are easy to install and do not require a lot of space. You can order a custom size splash guard that will fit your needs.

Inline glass doors are panels connected to other glass panels or a wall at a180° angle. The design is flexible and accommodates double doors, and can open either right or left-handed. You can choose a framed or frameless glass enclosure. They are available in various sizes ranging from 12 – 36 inches in width to 24 – 100 inches in height.

Hinged glass shower doors can open only in one direction because they are attached to a wall or fixed glass panel with pivoting hinges.

  • Pivoted doors

This shower door can open either in or out because it is attached to a pivot hinge. It can be a revolving door when mounted at the center of the entrance.

Conclusion

It is crucial to ensure that you get the correct measurements for the glass shower door when ordering. A correctly sized door is vital for both functionality and aesthetics. Our straightforward guide will help you obtain the most accurate measurements for your door.

Whatever the style you choose for your glass shower door, at Glassupply.com, we offer a wide variety of glass shower doors. We supply both standard and customized glass doors to suit your needs. You can also choose a frameless, framed, or patterned glass frame that will fit your style.

Newer The Best Shower Door Designs for Small Bathrooms
Back to list
Older How to Keep your Kitchen Coronavirus Free