Measuring Guide
Installation Guide
View Portfolio

Hardware Selection

Continue

Select Railing Shape

Continue

Inline

In the inline section, there is only a single side shape.

L Shape

In the L shape section, there are two sides in form of L shape.

U Shape

In the U shape section, there are three sides align to each other.

Enclosed

In the enclosed shape section, there are four sides align with each other.

Stair

In the Stair section, there are one and two sides Railing.

Project Variables

Continue
Hardware
304 Stainless Steel (Ideal for Interior Applications)
Spigot With Level Adjustment Screws – Polished Stainless Steel 316
Spigot With Level Adjustment Screws – Polished Stainless Steel 2205
304 Matte Black
Spigot With Level Adjustment Screws – Matte Black 2205
Polished Stainless Steel Standoff Kit - Height: 1 1/2"
Polished Stainless Steel Standoff Kit - Height: 2"
Matte Black Standoff Kit - Height: 1 1/2"
Matte Black Standoff Kit - Height: 2"
Side Mounted Spigots - Matte Black Stainless Steel 2205
Side Mounted Spigots - Polished Stainless Steel 2205

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

Spigot With Level Adjustment Screws – Polished Stainless Steel 2205:

Best stainless steel quality on the market. Duplex 2205 stainless steel, marine grade, anti corrosion....

Duplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades.

*Not available in matte black

Read more

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

304 Stainless Steel (Ideal for Interior Applications):

Grade 304 stainless steel is generally regarded as the most common austenitic stainless steel. It contains... high nickel content that is typically between 8 and 10.5 percent by weight and a high amount of chromium at approximately 18 to 20 percent by weight. Other major alloying elements include manganese, silicon, and carbon. The remainder of the chemical composition is primarily iron.

The high amounts of chromium and nickel give 304 stainless steel excellent corrosion resistance. Common applications of 304 stainless steel include:

  • Commercial food processing equipment
  • Fasteners
  • Piping
  • Heat exchangers
  • Structures in environments that would corrode standard carbon steel.
  • Appliances such as refrigerators and dishwashers
Read more

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

Spigot With Level Adjustment Screws – Polished Stainless Steel 316 :

Similar to 304, Grade 316 polished stainless steel has high amounts of chromium and nickel. 316 also contains silicon,... manganese, and carbon, with the majority of the composition being iron. A major difference between 304 and 316 polished stainless steel is the chemical composition, with 316 containing a significant amount of molybdenum; typically 2 to 3 percent by weight vs only trace amounts found in 304. The higher molybdenum content results in grade 316 possessing increased corrosion resistance.

316 polished stainless steel is often considered one of the most suitable choices when selecting an austenitic stainless steel for marine applications. Other common applications of 316 stainless steel include:

  • Chemical processing and storage equipment
  • Refinery equipment
  • Medical devices
  • Marine environments, especially those with chlorides present
Read more

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

304 Matte Black:

Grade 304 stainless steel is generally regarded as the most common austenitic stainless steel. It contains... high nickel content that is typically between 8 and 10.5 percent by weight and a high amount of chromium at approximately 18 to 20 percent by weight. Other major alloying elements include manganese, silicon, and carbon. The remainder of the chemical composition is primarily iron.

The high amounts of chromium and nickel give 304 stainless steel excellent corrosion resistance. Common applications of 304 stainless steel include:

  • Commercial food processing equipment
  • Fasteners
  • Piping
  • Heat exchangers
  • Structures in environments that would corrode standard carbon steel.
  • Appliances such as refrigerators and dishwashers
Read more

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

Spigot With Level Adjustment Screws – Matte Black 2205:

Best stainless steel quality on the market. Duplex 2205 Matte Black stainless steel, marine grade, anti corrosion....

Duplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades.

*Not available in matte black

Read more
Matte Black Adjustable Standoff - 1.5" Diameter and 1.5" Base Height

  • Stainless Steel 316
  • Includes: 1.5" Diameter Standoff Base (Threaded 3/8" - 16), 1.5" Diameter Standoff Cap

Polished Stainless Steel Adjustable Standoff - 1.5" Diameter and 1.5" Base Height

  • Stainless Steel
  • Includes: 1.5" Diameter Standoff Base (Threaded 3/8" - 16), 1.5" Diameter Standoff Cap

Polished Stainless Steel Adjustable Standoff - 1.5" Diameter and 2.0" Base Height

  • Stainless Steel
  • ncludes: 1.5" Diameter Standoff Base (Threaded 3/8" - 16), 1.5" Diameter Standoff Cap

Matte Black Adjustable Standoff - 1.5" Diameter and 2.0" Base Height

  • Stainless Steel
  • Includes: 1.5" Diameter Standoff Base (Threaded 3/8" - 16), 1.5" Diameter Standoff Cap

Matte Black Side Mounted Spigot - Stainless Steel 2205

  • Stainless Steel 2205
  • Includes: 2" Diameter Standoff Base (Threaded: 3/8" - 16), 2" Diameter Standoff Cap, Hanger Bolt

Polished Stainless Steel Side Mounted Spigot - Stainless Steel 2205

  • Stainless Steel 2205
  • Includes: 2" Diameter Standoff Base (Threaded: 3/8" - 16), 2" Diameter Standoff Cap, Hanger Bolt

Railing Height
36 Inches
42 Inches
48 Inches
60 Inches

36 Inches

Minimum Height of 900mm (36 in.) in residential applications. If the surface is over 180 cm (6 ft.) from the finished floor, the guardrail must be at least 1070 mm (42 in.) high.

42 Inches

Minimum Height of 1070mm (42 in.) in commercial applications. For residential applications, if the surface is over 180 cm (6 ft.) from the finished floor, the guardrail must be at least 1070 mm (42 in.) high.

60 Inches

In rare occasions, municipalities may require 1.5 meters (5 ft.) high enclosures. Please refer to your local swimming pool safety regulation for more details

48 Inches

Any outdoor basin of water must be surrounded by an enclosure restricting access to it. The enclosure must be at least 1.2 meters (4 ft.) high at all points.
*In rare occasions, municipalities may require (5 ft.) high enclosures.

Top Rail Options
No Top Rail - Fully Frameless Railing
2205 Stainless Steel Square Top Rail

No Top Rail - Fully Frameless Railing

Maximize visibility without compromising on safety. Our fully frameless railings are certified for residential and commercial uses

Glass Type
1/2" Clear Tempered Glass - Polished Edges
2 x 1/4" Clear Tempered Laminated Glass with PVB Clear Film (Total Thickness 1/2")

1/2" Clear Tempered Glass - Polished Edges

SGCC Certified Tempered Glass

Link 1 / Link 2

2 x 1/4" Clear Tempered Laminated Glass with PVB Clear Film (Total Thickness 1/2")

Laminated tempered glass is a type of safety glass composed of two or more layers of glass with a layer of interlayer material (such as polyvinyl butyral (PVB)) sandwiched between them. The interlayer holds the glass together when shattered, reducing the risk of injury and damage. Tempered glass is heat-treated for increased strength and safety, making it more resistant to breakage and better able to withstand impact

Link 1 / Link 2

Specify Spans & Gates For Inline

Total Cost: $1135.00
Continue

Spans & Gates

Spacing between Glass Panels: 1 inch
End Spacing if 90 Degree Corner: 3/4 inch

  • 48.78 in
    panel
  • 48.78 in
    panel

Measurements


Self-closing Spring-loaded Hinges

Glass
Wall


Glass
Wall

Yes
No

Yes
No

Specific Span Information

1
2
3
4
  • A
  • B
  • C
  • D
Glass Specifications

1/2" clear Tempered Glass-Polished Edges.

SGCC Certified Tempered Glass

Link 1 / Link 2

Hardware Details
Gate Hardware Specifications

Specify Spans & Gates For Inline

Total Cost: $1333.33>
Continue

Span Length: Total Length (i.e. Multiple Panels)

  • 45.62 in
    panel
  • 45.62 in
    panel
  • 45.62 in
    panel
  • 45.62 in
    panel

Measurements

10mm Clear Glass

Master range

Specific Span Information

  • A
  • B
  • C
  • D
Glass Specifications
  • Thickness: 3/8" (10mm )
  • Edge Finishing: Flat Polished
  • Glass Type: Clear Glass
  • Tempered: Yes
  • Span Length: Specify overall span length in inches for the required side.
  • Residential: 36 inches
  • Commercial & Elevated Structures: 42 inches If the deck surface is over 180 cm (6 ft.) from the finished floor, the guardrail must be at least 107 cm (42 in.) high.
  • Pool: 48 inches
Gate Hardware Specifications
  • - 2205 Stainless Steel
  • - 2205 Stainless Steel
  • - Close the door automatically
  • - Can be used in both summer and winter
  • - 2205 Stainless Steel The door stopper keeps the door open for a particular event or as needed

Specify Spans & Gates For Inline

Total Cost: $1583.33
Continue

Spacing between Glass Panels: 1 inch
End Spacing if 90 Degree Corner: 3/4 inch

  • 49.06 in
    panel
  • 49.06 in
    panel
  • 49.06 in
    panel
  • 49.06 in
    panel

Measurements


Self-closing Spring-loaded Hinges

Glass
Wall


Glass
Wall

Yes
No

Yes
No

Specific Span Information

1
2
3
4
  • A
  • B
  • C
  • D
Glass Specifications

1/2" clear Tempered Glass-Polished Edges.

SGCC Certified Tempered Glass

Link 1 / Link 2

Hardware Details
Gate Hardware Specifications

Specify Spans & Gates For Inline

Total Cost: $1583.33
Continue

Spacing between Glass Panels: 1 inch
End Spacing if 90 Degree Corner: 3/4 inch

  • 49.06 in
    panel
  • 49.06 in
    panel
  • 49.06 in
    panel
  • 49.06 in
    panel

Measurements


Self-closing Spring-loaded Hinges

Glass
Wall


Glass
Wall

Yes
No

Yes
No

Specific Span Information

1
2
3
4
  • A
  • B
  • C
  • D
Glass Specifications

1/2" clear Tempered Glass-Polished Edges.

SGCC Certified Tempered Glass

Link 1 / Link 2

Hardware Details

Specify Spans & Stair For 1 Side

Total Cost: $230.00
Continue

Measurements


Yes
No

Yes
No
Glass Specifications

1/2" clear Tempered Glass-Polished Edges.

SGCC Certified Tempered Glass

Link 1 / Link 2

Hardware Details

Specify Spans & Stair For Inline

Total Cost: $1666.66
Continue

Span Length: Total Length (i.e. Multiple Panels)

Measurements

10mm Clear Glass
Glass Specifications
  • Thickness: 1/2" (12mm )
  • Edge Finishing: Flat Polished
  • Glass Type: Clear Glass
  • Tempered: Yes
  • Number of steps: When counting stairs, you are counting how many times you have to lift your foot. Therefore, the landing counts as a step.
  • One side: Railing is only required for one side of the stairs.
  • Two sides: Railing is required for both sides of the stairs.
  • Total Run: Total Run is the exact horizontal distance from the edge of the upper floor to the end of the bottom riser.
  • Total Rise: Total Rise is the exact vertical distance from the top of one finish floor to the top of another finish floor.
  • Residential: 36 inches
  • Commercial & Elevated Structures: 42 inches If the deck surface is over 180 cm (6 ft.) from the finished floor, the guardrail must be at least 107 cm (42 in.) high.
  • Pool: 48 inches

Specify Span & Stair

Total Cost: $1,380.02
Continue

Measurements


Yes
No

Yes
No
Glass Specifications

1/2" clear Tempered Glass-Polished Edges.

SGCC Certified Tempered Glass

Link 1 / Link 2

Hardware Details

Specify Span & Stair

Total Cost: $1,380.02
Continue

Measurements


Yes
No

Yes
No
Glass Specifications

1/2" clear Tempered Glass-Polished Edges.

SGCC Certified Tempered Glass

Link 1 / Link 2

Hardware Details

Plan & Component List

Save Plan

Component List

12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots

Product : Stair

Sub Total

$

Plan & Component List

Save Plan

Component List

12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots

Product : Stair

Sub Total

$

Plan & Component List

Component List

12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots

Product : Inline

Sub Total

$
Loading...
Product 1 - Inline
Click on the image for Zoom Graph

Plan & Component List

Component List

QTY Description Cost
12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots

Product : Inline

Sub Total

$
Loading...
Click on the image for Zoom Graph

Plan & Component List

Component List

Product : Inline

Sub Total

$
Loading...
Product 1 - Inline
Click on the image for Zoom Graph

Plan & Component List

Component List

12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots

Product : Inline

Sub Total

$
Loading...
Product 1 - Inline
Click on the image for Zoom Graph

Plan & Component List

Save Plan
Add to Cart

Component List

QTY Sku Description Unit Price Total Price

Product : Inline Shape

$

Plan & Component List

Save Plan
Add to Cart

Component List

QTY Description Cost
12x 950mm W x 1200mm H toughened glass panel
6x 1950mm W x 1200mm H toughened glass panel
36x Stainless steel spigots

Sub Total

$

Measurement

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.